Why It Happens
- Porous concrete with too much water in the mix
- Unsealed construction joints and pipe penetrations
- High groundwater pressure against walls and floor
- Poor compaction or curing leaving honeycombing and cracks
How to Fix It
- 01
Make the concrete itself watertight with a waterproofing admixture and a low water-cement ratio
- 02
Seal every construction joint and penetration with waterbars or swelling strips
- 03
Add a sheet membrane where water pressure is high
- 04
Cure the concrete properly so the surface does not crack
Dealing with this now?
Call us and describe the site. We will recommend the products and quantities.
Products We Recommend
| Product range | What to use |
|---|---|
| Specialty Admixtures | Waterproof concrete — Sika® WT |
| Joint Sealing and Waterstops | Waterbars, SikaSwell® and Injectoflex |
| Waterproofing Membranes | Sikaplan® and SikaProof® membranes |
| Curing Compounds | Sika Antisol® curing |
Common Questions
Can an existing leaking basement be fixed?
Yes. Active leaks are usually treated by injecting cracks and joints, then applying a waterproof coating or membrane on the inside. The method depends on the water pressure.
Is waterproof concrete enough on its own?
It handles water through the concrete, but most leaks come through joints. Joints must be sealed separately.
When is a membrane needed?
When the basement sits below the water table or must stay completely dry, such as for storage or plant rooms.